TrafficRevenue

Content

Armadillo Hoodie Review by The Scooter Scoop part 2

Saturday, July 31, 2010 0 comments


Armadillo Hoodie Review by The Scooter Scoop part 2
Thanks to Steve for doing this review for us on the Armadillo Scooter Hoodie. It was tested by 4 of his friends in Austin, TX they dropped the dummy filled with wood over 200 pounds with a helmet unto an open parking lot. They did a frontal drop and a rear drop. The results, well see for yourself

You won't need a $25,000 skin graph because at no point did it tear. The Hoodie is an awesome jacket. Available from http://www.ArmadilloScooterWear.com

D30

Protective scooter clothing can be stylish and comfortable. In the event of an accident if the rider is wearing the right clothing injury can be lessened or prevented completely.

Thanks to d30 technology, pronounced (dee-three-oh), scooter jackets and other protective clothing, can withstand impacts, and protect the rider.

The new d30 technology is used to create protective foam that is soft to the touch but is not large and bulky. Working at a molecular level the material changes properties instantly upon impact. The molecules move past each other freely during normal use, and lock together instantly when the material is impacted by another object. The harder the impact, the faster the molecules react, forming protective padding for the wearer.

Following impact, the molecules within the material will revert to their initial state, moving freely within the soft layer. The advantage of d30 protection is that this process can be repeated as many times as possible, and the quality of the garment will not be affected.

When applied to scooter clothing, the d30 protection is developed as protective pads and placed in areas deemed as of high importance to a scooterist. These pads are easy to remove, clean and put back in place.

As an additional precaution, areas of the garment will also be made reflective and be made part of the design, in order to make riders more visible at night and in general to motorists and pedestrians.

It should also be noted, that whilst offering high protection to the rider in terms of visibility and impact, protective clothing alone will not prevent a scooter rider from injury. Safe riding and common sense is also imperative, and only when you combine this with the right garments can the ultimate protection be offered.

Made with high strength nylon outer shells protective scooter clothing comes with a variety of inner liners. Available in fleece, and several varieties of nylon and polyester, they are designed to be versatile and remain machine washable.

Neither does it matter on the time of the year – jackets are available for all seasons. Due to its thin nature, d30 summer wear provides the protection as winter clothing.

Whether or not you choose to adopt d30 protective scooter clothing, bear in mind you do not have to compromise safety in order to look good on the road.

Armadillo Scooter Wear women’s collection includes jackets, trousers, gloves and accessories for the female scooter fanatic. Browse our site to find the best in women’s scooter clothing.

Read more »

Buggy Rollers! 250cc 300cc upgrades!

Friday, July 30, 2010 0 comments
We have the best upgrades for your 250cc Go Kart and Buggy - Order now the 23X18 Rollers from MRP in 15 grams and 17 grams available at http://www.mrp-speed.com
Read more »

How MRP exhausts are made

0 comments
How MRP exhausts are made

The Scooter Maven visits the factory to get a first hand look at the design of the MRP exhaust series.
http://www.mrp-speed.com
Read more »

ITALKIT KYMCO UPGRADES 300cc CYLINDER AND CRANKS

0 comments
Read more »

Blog Question: Why are you always wearing sunglasses?

0 comments



VESPA SUNGLASSES


Thanks to the Scooter Scoop for the plug and the question - The real reason is because these are sunglasses that we sell. Check them out at http://www.mrp-speed.com if you have a Vespa dealership in the US make sure to contact us to find out more about the Vespa branded sunglasses collection.
Read more »

The New MadAss 50cc by Peirspeed - Sach the Maven takes a closer look at...

Thursday, July 29, 2010 0 comments


TESTING THE PEIRSPEED MADASS

MRP HAS PARTS FOR MANY DIFFERENT TYPES OF BIKES
Are you driving a Diamo? CFMOTO? TNG? Linhai? Malaguti Italy? Does your local shop not know what these names mean? Well then visit one of our dealers and have them give us a call. We are the only scooter parts distributor in the USA that is solely dealer direct and we are happy to send any potential online inquiries to stocking stores. So any consumers looking for Daelim parts will have to go to a store with an MRP account or have their store buy from another dealer that has an account with us. We also sell top name scooter brands like SN, Duro, Innova, Kenda, Bridgestone, Gates, Powerlink,

Manuals
http://www.martinracingdealer.com/WSWrapper.jsp?mypage=Manuals.htm


Stocking Dealer locator
http://www.martinracingdealer.com/locator/index.php



MRP distributes OEM parts for TNG (CMSI), select models of CF Moto, Daelim Motors Korea ( parts should appear on website by mid July) Malaguti of Italy (www.Malaguti.com) Keeway Southeast (Keeway, Vento, QJ, Andretti, Yamati models), CPI Taiwan, Powersports Factory Brands PSF, Diamo, Cubik (matches OEM Vento part numbers), as well as QJ and ZNEN (who manufacture bikes for a variety of scooter importers) such as FlyScooters, Lance, BMS, Qlink models that were ZNEN corresponding to matching TNG parts.

Every scooter is somones first ride, we help the dealers and consumers find those hard to find parts. Doesn't matter what brand it is, we've been doing the Chinese scooter parts thing since 2004 so we can help you find the right part.

Since January 2009 MRP has expanded by acquiring the QJ – Keeway Southeast distribution parts warehouse, the Diamo USA / LS Motorsports / Italjet USA parts warehouse, CPI – TAIWAN Distribution, and TNG Scooters.
Read more »

Blog Questions DAELIM OEM and Aftermarket parts

0 comments


Blog Questions DAELIM
Thanks to Steve at http://www.thescooterscoop.com for sending us a bunch of leads of the DAELIM parts situation - heres our response to help the dealers find the parts.

MRP is not associated with DAELIM we are a third party solutions provider. Daelim Motors USA closed and left a lot of new vehicles on dealer floors that are still being sold in the USA. In 2010 the Korean factory stopped responding to Dealers or sending free warranty parts so its lead to a lot of problems for shops who are stuck with new vehicles.

We have parts now both OEM and aftermarket to help you with these. Korean parts are high quality parts and in no way are they the same as their Chinese branded counterparts. This company was once part of Honda.

OUR POSITION ON OEM PARTS
Daelim is a fantastic brand and sadly the US distributor closed due to the downturn, GE Capital pulling financing, and several things I can't comment on. Let's just say it happened to a lot of companies this was not the only brand. MRP has acquired several distributors that closed we are not the factory distributor for DAELIM, but we welcome supporting what we can for these parts. DAELIM is added to our staple of QJ, LINHAI and others like Malaguti which are OEM factory parts.

In this business you tend to hear more of the negative feedback than the positive, the guy who has been waiting on a part for a year to sell his Daelim or the store being sued for a lack of lemon law compliance doesn't care, he's just happy MRP has the part. Daelim has tried selling parts to several stores in the USA, but let's be honest a store can't do the volume a distributor with a warehouse does to make this cost effective. That's why MRP is a good solution to this problem and it brings the prices down for the dealers overall. We sell to over a 1,000 stores in North and South America.

We want to help consumers and dealers get back on the road. SHOULD THERE BE A NEW IMPORTER IN 2011 for the brand we are more than happy to help them and work with them.

1. We do not handle warranties - we only sell the parts.
2. If you need parts we will help you contact an MRP dealer that can order them for you.
3. We strongly believe DAELIM is a quality product an deserves to have parts available for it and that is why we are investing our time in doing this.

If you have any questions or need to find a local shop contact us http://www.mrp-speed.com
Read more »

GY6 Engine Spacer for Racing and Ruckus Conve N-MP-09511

Wednesday, July 28, 2010 0 comments
GY6 Engine Spacer for Racing and Ruckus Zoomer Conversion Space N-MP-09511
Read more »

Avoid Fake Chinese Brands Part 4

0 comments


Every day we have more and more dealers ask for the least expensive belt or part. We suggest you avoid all this and offer your clients good, safe, reliable brands. MRP only carries brand name belts like Gates, Polini, Malossi, Athena, Bando, Powerlink. When you see dealers trying to save $2 or $3 by selling unknowun Kupin? Powerspeed ( a copy of Powerlink ) or Sando these are just imitations, if you can't find a real belt contact us and we will give you a dealer that can sell you real brand names: http://www.mrp-speed.com
Read more »

GY6 Chrome Side Stand for Vento and Genuine N-MP-04150-1

Tuesday, July 27, 2010 0 comments
Read more »

GY6 Chrome Side Stand for Vento and Genuine N-MP-04150-1

0 comments
Read more »

CF MOTO CDIS

0 comments


MAKE SURE YOU ORDER OEM CF MOTO AND NOT THE FAKE STUFF
We get this question all the time - Chinese CDIs are not all the same.
SEE ALSO THIS VIDEO http://www.youtube.com/watch?v=5Emawf...

THE ONLY DISTRIBUTOR IN THE USA WITH CFMOTO OEM, LINHAI OEM, BENELLI - ANDRETTI OEM QJ, PLUS THE RACING VERSIONS IS MRP Only by selling the OEM can you sell racing that really works, because we know what the originals are because we have them. This is the biggest problem we see out there, consumers buying GY6 and other CDIs and trying to put them on a Linhai 400cc isn't going to work same for CF MOTO its like HONDA its their design it wont work with a standard ZNEN or GY6 CDI. So order from the people that know over 12,000 scooter parts order MRP!
http://www.mrp-speed.com

There are more and more companies promising to sell cheap GY6 and CDIs online. We previously reported on fake parts from China, we'll these are real Chinese parts, but what's starting to happen is that the industry requires brand specific models as more companies like CF MOTO, Linhai, Kymco manufacture in China they have parts that are not "Generic" nor cross compatible. They are brand specific much like Honda or Yamaha. So when we get emails from consumers saying " I made a mistake I purchased such and such CDI to save money " we have to say "Stop" before you buy check the OEM part and your dealer can order it from our repair manual section with real part numbers from the right factory.
Read more »

QMB139 Race Carb Jets N-MP-07086-78 and N-MP-07086-95 GY650

0 comments
Carburetor Jet size for 50cc 4-stroke QMB139 engines. N-MP-07086-78 and N-MP-07086-95 # Keihin Round Style Main Jet in 78mm and 95mm these are the performance jets for all the stock QMB139 GY650cc 4t Chinese Taiwanese scooters
# Overall Length: 7.2mm

Get them at http://www.mrp-speed.com
Read more »

Zuma 125 Sliders 20 X 12 Available from Scooter Ninja

Monday, July 26, 2010 0 comments
Zuma 125 Sliders 20 X 12 Available from Scooter Ninja available from the MRP website http://www.mrp-speed.com

We have ZUMA 125 rollers and Sliders from Malossi, Polini, Koso, MRP, Top Racing, Turbo Kit -TK Spain, Dr Pulley, Scooter Ninja and more! visit our site for more info.

We have a ton of stuff make sure to check it out on our site. Parts for: 125cc GY6 QMI152/157 QMJ152/157 4-stroke engines, 250cc 4-stroke CN250 water-cooled 172mm engines, 4-stroke QMB139 engines, 50cc 2-stroke D1E41QMB02, D1E41QMB, H1E41QMB and 1E41QMB model engines. This motor is used on many popular Chinese scooters including the Qingqi QMQT50-B2, 50cc 2-stroke 1PE40QMB Minarelli based engine and more!
Read more »

Daelim Parts now available from MRP

0 comments


The Scooter Scoop sent us an email telling us several US consumers have been waiting for someone to distribute Daelim parts. So here you go, we have a great deal to go we are adding 20 to 30 parts per day but these are OEM Korea Daelim parts and we are hard at work making sure you the consumer and the dealer have parts in the US after the US office closed. http://www.mrp-speed.com

MAKE SURE TO VISIT THE SCOOTER SCOOP
http://www.thescooterscoop.com

LOOKING FOR DAELIM? NEVER FEAR WE WORKED HARD TO GET THESE IN!

Are you driving a Diamo? CFMOTO? TNG? Linhai? Malaguti Italy? Does your local shop not know what these names mean? Well then visit one of our dealers and have them give us a call. We are the only scooter parts distributor in the USA that is solely dealer direct and we are happy to send any potential online inquiries to stocking stores. So any consumers looking for Daelim parts will have to go to a store with an MRP account or have their store buy from another dealer that has an account with us. We also sell top name scooter brands like SN, Duro, Innova, Kenda, Bridgestone, Gates, Powerlink,


Are you driving a Diamo? CFMOTO? TNG? Linhai? Malaguti Italy? Does your local shop not know what these names mean? Well then visit one of our dealers and have them give us a call. We are the only scooter parts distributor in the USA that is solely dealer direct and we are happy to send any potential online inquiries to stocking stores. So any consumers looking for Daelim parts will have to go to a store with an MRP account or have their store buy from another dealer that has an account with us. We also sell top name scooter brands like SN, Duro, Innova, Kenda, Bridgestone, Gates, Powerlink,

Manuals
http://www.martinracingdealer.com/WSWrapper.jsp?mypage=Manuals.htm

Stocking Dealer locator
http://www.martinracingdealer.com/locator/index.php


MRP distributes OEM parts for TNG (CMSI), select models of CF Moto, Daelim Motors Korea ( parts should appear on website by mid July) Malaguti of Italy (www.Malaguti.com) Keeway Southeast (Keeway, Vento, QJ, Andretti, Yamati models), CPI Taiwan, Powersports Factory Brands PSF, Diamo, Cubik (matches OEM Vento part numbers), as well as QJ and ZNEN (who manufacture bikes for a variety of scooter importers) such as FlyScooters, Lance, BMS, Qlink models that were ZNEN corresponding to matching TNG parts.

Every scooter is somones first ride, we help the dealers and consumers find those hard to find parts. Doesn't matter what brand it is, we've been doing the Chinese scooter parts thing since 2004 so we can help you find the right part.

Since January 2009 MRP has expanded by acquiring the QJ – Keeway Southeast distribution parts warehouse, the Diamo USA / LS Motorsports / Italjet USA parts warehouse, CPI – TAIWAN Distribution, and TNG Scooters.

The company has OEM parts for Malaguti scooters of Italy, Benelli (acquired by QJ in 2006) the Italian brand now made in China and sold in the USA under the Andretti name, MH Motorhispania of Spain, RX, Loncin, Lifan, Linhai, Zongshen, Wangye, MS UTVs, and CPI Taiwan. In addition the company distributes performance parts from Athena, Malossi, Turbo Kit, Innova, Vee Rubber, Duro, Bando, Gates, Powerlink, Posh, Maxxis, Namura, Scooter Ninja, Slipstreamer, and MRP.

Products carried by MRP can be obtain exclusively at select Motorcycle Dealerships and Repair Shops in the USA. MRP is the one stop wholesale ONLY scooter, buggy, and ATV parts distributor. For a list of retailers visit www.mrp-speed.com
When it comes to parts we have it all:

From Scooters to Chinese UTVs we got it:

* air filters
* axles
* batteries
* battery chargers
* bearings
* belts
* body parts
* brakes
* cables
* carburetors
* CDIs
* chains
* controllers (electric)
* electronics
* Engine Parts
* engines & motors
* frame parts
* gas caps and gas tanks
* handles, grips, controls
* lights
* mufflers
* sprockets
* tires and tubes
* wheels

We have a ton of stuff make sure to check it out on our site. Parts for: 125cc GY6 QMI152/157 QMJ152/157 4-stroke engines, 250cc 4-stroke CN250 water-cooled 172mm engines, 4-stroke QMB139 engines, 50cc 2-stroke D1E41QMB02, D1E41QMB, H1E41QMB and 1E41QMB model engines. This motor is used on many popular Chinese scooters including the Qingqi QMQT50-B2, 50cc 2-stroke 1PE40QMB Minarelli based engine and more!

MRP has added more parts to its lineup to be the number one source of all scooters items. Some distributors carry Chinese or European scooter parts, but MRP is the only company in the USA the covers the full range.

MRP earlier this year acquired parts from the now-closed QJ - Keeway warehouse and product from the defunct Diamo USA/LS Motorsports. The company also has OEM parts for Malaguti, MH, RX, Loncin, Lifan, Linhai, Zonshen, MS UTVs, and distributes aftermarket parts from Athena, Malossi, Turbo Kit, Innova, Vee Rubber, Namura, Scooter Ninja, Slipstreamer and MRP's house brand.
Read more »

N-MP-03621 and ZTRQMB139 Spring Upgrades for 139QMB

Friday, July 23, 2010 0 comments


N-MP-03621 and ZTRQMB139 Spring Upgrades for 139QMB available from MRP http://www.mrp-speed.com This engine is used on virtually all 49cc/50cc 4-stroke Chinese and Taiwanese scooters. Baja SC50, Strada RX 50, Jalon JL50QT-21, falcon and JL50QT-15, JL50QT-16,Strada RX 50, Jalon JL50QT-21 falcon, JL50QT-15, JL50QT-16, JL50QT-18, Pantera Freedom, Fusion and Retro, Verucci VC50TS-3M, Sunl SL50QT-16, SL50QT-16, SL50QT-18, SL50QT-2, SL50QT-3, Roketa Bahama, Maui, Sicily, Tank, Baotian 50QT-9, Baotian, 50QT-11, Dotera 50QT-11, Jalon JL50QT-18, Sinski XSJ50QT-6, Sinski XSJ50QT-B, Taishan Commuter, Taishan Sport Zhong Hu 50cc 4t and more! Many Kymco and SYM models also use this 4T engine. To find out more visit Martin Racing Performance and call one of our dealers to order the parts.
Read more »

Proper GY6 Sliders and Rollers

0 comments

Proper GY6 Sliders and Rollers
Older Strada Yamatis from Powersports Factory use a KDU engine not GY6 from 2005 these units have a GY6 CVT but not the cylinder so dealers get confused same applies to the Sauron 125 but both KDU and GY6 use 17.9 X 14 or 18 X 14 rollers and sliders.
= Not all 150cc units use the same 18 X 14 Rollers we have found many new Chinese units are using 19 X 15 and 20 X 12 these are different brands like Xingyue and Wushan. Boatian, Wangye ( QJ brands like Vento, Benelli, Andretti, Keeway all use standard) 18 X 14. For more advanced 200cc, 250cc, 260cc Linhai Yamaha found in RP200cc, ITA 260 VOG 260, XY 260, BMS 250, Diamo 250 and others order Scooter Ninja Sliders in 20 X 12 these are all in stock at MRP http://www.mrp-speed.com

We get a ton of questions about the sliders, if you have questions make sure to contact us so we can help you with the applications for your CVT.
Read more »

Carter Bros update – Owners retain team of lawyers

Thursday, July 22, 2010 0 comments
Carter Bros update – Owners retain team of lawyers

We'll no word from Carter or SYM in Taiwan as to what is going on, but we do want the dealers to know we are ordering more SYM parts as we speak we are shipping them by air to help the dealers get back on the road. Consumers shouldn't have to play the price for this.

Stay tuned for more from MRP.



Our statement regarding the Carter Warehouse fire:
MRP Your source for SYM - Carter and Daelim parts
contact us for all your needs http://www.mrp-speed.com in the US you can buy any of our SYM or Daelim parts from an authorized MRP dealership.
Read more »

GY6 59mm, 61mm piston big bore upgrades

Wednesday, July 21, 2010 0 comments


Been selling these for a couple of years. GY6 Air Cooled are based on the older 2003 Honda engines that never quite made it to America under the Honda name, but are all over their joint ventures in Asia which started with the 125cc version which was copied and adapted. The standard GY6 first made it to the US with Vento the now defunct importer out of California. The original Vento GY6 Air cooled back in 2003-2004 actually featured a 52mm engine ( 125cc ) despite being called a 150cc. We sell 52mm pistons for these. You can go up to 58mm without boring the case in 90% of the standard long and short case GY6 A type engines. Some will go as high as 58.5 and 59mm so thats why we sell so many of these upgrades. At MRP we have them all from 52mm all the way to 64mm. http://www.mrp-speed.com

PISTONS FOR 150cc and 125cc GY6 QMI152/157 QMJ152/157 4-stroke engines Lifan, United Motors, Matrix 150, Verucci, Qingqi, X-Treme, TGB, Vento, SUNL, Various unlisted makes/models, Tank, Vento Phantom, Strada, Wildfire, Baron, Diamo, Boss, Bravo, Baja SC125, Baja, Honda, Schwinn, Eton, Boreem (BMS), Tank Racer-150/150T-7, Tank Racer-150DE /150T-7A, Tank Racer-150DS/150T-7B, CFMoto, Redcat, Baja SC150, SYM, Kymco, Bashan, Avanti, Dotera, Yamati , YongKang, Baotian, Vento Sauron, ZNEN
Read more »

SUPPORT SCOOT MAGAZINE

0 comments


FREE COPY OF SCOOT MAGAZINE WITH ANY PURCHASE IN THE MONTH OF JULY 2010

SUPPORT THE ONLY US CONSUMER MAGAZINE! visit them at http://www.scootmagazine.com spend all your cash there I MEAN IT!
Read more »

MRP Your source for SYM - Carter and Daelim scooter parts

1 comments


Responding to the tragic incident over at Carter Brothers we are doing everything we can to get the dealers many of the parts we have in stock for the Carter Go Karts, SYM scooters, and accessories. We don't have everything we are in no way as capable as Carter was in this because they are the importer and OEM in this case, but we have many third party parts that work for the Carter Go Karts ( Exhausts, pistons, gaskets, rollers, cvt upgrades ) and for the SYM scooters ( cylinders, pistons, belts ) we have just ordered more OEM parts from Taiwan like HD 200cc parts pistons, clutches, and more to help the dealers. NEVER FEAR MRP IS HERE! you can call an active dealer with MRP and order these on our site http://www.mrp-speed.com

Stay tuned to Guidos Blog for all the news on SYM and Carter as it updates, also check the scooter scoop http://www.thescooterscoop.com


Guidos links bookmark them!

responding to the industry news: http://blog.guidoebert.com/2010/07/12/cartersym-warehouse-burns-to-total-loss.aspx#Comment

More info from Guido
http://blog.guidoebert.com/2010/03/19/sym-not-satisfied-with-us-distributor.aspx
Read more »

My opinion on the lower end brands

0 comments


Why I would avoid buying a used or even new SUNL, Roketa, Tank Motorsports vehicle. Stay away from this stuff as a store if you value your dealers license and you want to stay in business. There's a lot of good brands working in China these days like Piaggio - Vespa, CFMOTO, Kymco, SYM and the mainland product can be as good as Taiwan or other countries depending on who is helping make it. The other guys I just mentioned like Tank don't care about quality, EPA, or meeting US state dealers laws. This lower end of the spectrum give everyone a bad rep. Stay away from it if you want to stay in business long term.
Read more »

Triangle Pieces for your variator make sure to change them

Tuesday, July 20, 2010 0 comments


When you upgrade your rollers its good to put in some fresh variator triangle slider pieces. These wear out just like rollers and sliders do. MRP stocks the Malossi, Polini, DR PULLEY - Union Material, Koso, Scooter Ninja, and MRP slider triangle pieces. Make sure to order them in all the popular sizes 30X20, 30 X 15, 25X19, 20X15, 19X15, 18X14, 16X13, 15X12, 17X12 we have them visit our site for more info http://www.mrp-speed.com

When replacing the rollers always check the triangle pieces since replacing them with new ones of better material will help the overall performance of your CVT on the scooter buggy or ATV. http://www.youtube.com/watch?v=QZnW6xZ9UnA

The next question is which roller to buy?
We answer your questions: http://www.youtube.com/watch?v=okK9veGKcWs


Cylindrical Sliders, Square Sliders, and round rollers!


More on J Costa / TK variators and sliders http://www.youtube.com/watch?v=4U0VW7gZooo&feature=channel
Read more »

2010 MRP RACING IN FULL FORCE

0 comments
Team Scootertronics sponsored by PIT Motors / MRP / CPI was out in full force this weekend make sure to give them some love at www.Scootertronics.com we've posted some of their pictures in the past these are from this past weekend at the track.



MAKE SURE TO SUPPORT A REAL SHOP WITH REAL RACERS
Visit the shop
The Scooter Shop at Scootertronics

104 Fredrick Rd
Thurmount, MD 21788
800.743.8702/301.576.1874 Internet Sales Orders
240.288.8220 (Retail Location Shop Repairs Sales of scooters ATVs Go Carts Parts)


Read more »

Blog Question - How do I wash the Armadillo jacket D30?

0 comments


Easy - it's got velcro and you can remove it. Check this video out.

D30 is removable from all Armadillo clothing so you can wash the jackets without any worries, isn't that awesome?

D30
What is it? is it toxic? when you buy the jacket is it liquid?

We get a lot of questions on our blog and by email so I'm answering them as best I can here. The stuff is pretty cool, its being sold to the US army now and its inside all the Armadillo jackets we now distribute that you can find at http://www.mrp-speed.com

For more info on Armadillo visit http://www.ArmadilloScooterWear.com

This stuff is amazing! Soft and malleable when touched gently, but instantly hardens when struck with force. Perfect combination for motorcycle jacket armor. The d3o armor is featured in Armadillos Jacket line. http://www.armadilloscooterwear.com or http://www.mrp-speed.com

d3o™ Intelligent Shock Absorption™ is a patented, shock absorbing material, engineered with Intelligent Molecules. d3o™ is rate-sensitive meaning that when moved slowly, the molecules flow freely making it soft and flexible. At high speeds howeverlike in an impactthe molecules lock together making the material an excellent shock absorber. The whole process is repeatable, occurs instantly and returns to its original state as soon as the impact is over.

d3o™ is also extremely low profile and integrates seamlessly into garments, so neither style or function has to be compromised. These qualities make it perfect for any application where you need total freedom of movement and excellent shock absorption.
Read more »

MORE ON D30 AND ARMADILLO COMMON QUESTIONS

0 comments
I posted some more videos on the D30 and figured I would repost this question I get all the time. D30 is INSIDE ALL THE GEAR WE sell from the jackets to the Gloves.

ARMADILLO IS THE ONLY SCOOTER WEAR AND JACKETS IN THE USA FEATURING D30 AND YOU CAN ONLY GET THESE FROM AN MRP DEALER. VISIT US AT http://www.mrp-speed.com


What is it? is it toxic? when you buy the jacket is it liquid?
We get a lot of questions on our blog and by email so I’m answering them as best I can here. The stuff is pretty cool, its being sold to the US army now and its inside all the Armadillo jackets we now distribute that you can find at http://www.mrp-speed.com

For more info on Armadillo visit http://www.ArmadilloScooterWear.com

This stuff is amazing! Soft and malleable when touched gently, but instantly hardens when struck with force. Perfect combination for motorcycle jacket armor. The d3o armor is featured in Armadillos Jacket line. http://www.armadilloscooterwear.com or http://www.mrp-speed.com

d3o™ Intelligent Shock Absorption™ is a patented, shock absorbing material, engineered with Intelligent Molecules. d3o™ is rate-sensitive meaning that when moved slowly, the molecules flow freely making it soft and flexible. At high speeds howeverlike in an impactthe molecules lock together making the material an excellent shock absorber. The whole process is repeatable, occurs instantly and returns to its original state as soon as the impact is over.

d3o™ is also extremely low profile and integrates seamlessly into garments, so neither style or function has to be compromised. These qualities make it perfect for any application where you need total freedom of movement and excellent shock absorption.
http://www.youtube.com/watch?v=bWk3adcPl3I


Inside every Armadillo Jacket is this awesome D30 material that could save your life. Unbelievable stuff used only by the US Army and serious riders. I watched an Iphone covered in this stuff dropped and it didnt have a scratch.

Amazing stuff available from www.ArmadilloScooterWear.com
Read more »

Benelli Andretti Powersports Factory Yamati Scooter Parts

0 comments


Benelli Andretti Powersports Factory Yamati Scooter Parts

MRP has them http://www.mrp-speed.com

Visit us at http://www.mrp-speed.com

MRP sells parts for all the QJ brands BMI, Diamo, TNG, CPI, Vento, Benelli - Andretti, Xtreme Motor Co and more! Visit us for more info.


THE ONLY DISTRIBUTOR IN THE USA WITH CFMOTO OEM, LINHAI OEM, BENELLI - ANDRETTI OEM QJ, PLUS THE RACING VERSIONS IS MRP Only by selling the OEM can you sell racing that really works, because we know what the originals are because we have them. This is the biggest problem we see out there, consumers buying GY6 and other CDIs and trying to put them on a Linhai 400cc isn't going to work same for CF MOTO its like HONDA its their design it wont work with a standard ZNEN or GY6 CDI. So order from the people that know over 12,000 scooter parts order MRP! http://www.mrp-speed.com There are more and more companies promising to sell cheap GY6 and CDIs online. We previously reported on fake parts from China, we'll these are real Chinese parts, but what's starting to happen is that the industry requires brand specific models as more companies like CF MOTO, Linhai, Kymco manufacture in China they have parts that are not "Generic" nor cross compatible. They are brand specific much like Honda or Yamaha. So when we get emails from consumers saying " I made a mistake I purchased such and such CDI to save money " we have to say "Stop" before you buy check the OEM part and your dealer can order it from our repair manual section with real part numbers from the right factory.

QianJiang motor is one of the largest motorcycle manufacturer in Asia. Founded in 1985, ZHEJIANG QIANJIANG MOTORCYCLE CO., LTD (hereinafter referred to as QJ), with registered office in Wenling (Zhejiang Province), is today one of the largest manufacturers of 2-wheeled vehicles in China.QJ is a state holding enterprise, with 5 domestic subsidiaries, 10 branches, 1 overseas subsidiary and over 10,000 employees.

QJ aims to build global distribution and after-sales service net-work and launches independent innovative products. Our product range includes motorcycles, scooters and mopeds from 50cc to 1,130cc under the Qjiang, Benelli, Generic and Keeway brands. The present production capacity is 1.5 million 2-wheeled vehicles and 2 million engines per year. Over 22% products are exported to 136 countries all over the world. QJ also operates ATV, mini dirt bikes, garden tools, vacuum pump etc. Today, QJ products are available on every continent except Antarctica.

European design, Japanese quality with Chinese cost is QJ management motto. QJ builds 2 R&D centers in Europe and China, cooperating with professional and experienced experts from Italy, Austria, Japan, Germany and France etc. QJ is the only Chinese motorcycle company worldwide to produce high-speed racing motorcycles and touring motorcycles. Every year, QJ develops and launches new products to fulfill customers distinct desires."

QJ is the earliest enterprise to be certified with TUV ISO9001 in sector in China. The trademark QJIANG has been recognized as Chinese Famous Trademark and the most competitive brand. QJ engines are National Free-inspection Product. QJ is listed as one of the recommended brands of 2007 electrical and mechanical products for export. Our mission and vision is to build a worldwide first-class motorcycle company.For more information please visit our website at www.qjmotor.com
Read more »

Luggage Boxes and Bags must have items for the shop!

Monday, July 19, 2010 0 comments
Read more »

Daelim Korean Scooter Parts

0 comments
We spent the weekend adding Daelim OEM parts.

The US importer closed about a year and half ago and I know Daelim in Korea fired 40% of its staff from the motorcycle side so its been next to impossible for US dealers to get parts and forget warranties. Until there is a new US import its been a nightmare for US dealers so we decided to take it upon ourselves to add these parts to our site and database. It's a lot of work, but we are doing it. So if you need DAELIM OEM parts for your scooter we've just managed to add a ton of them online to our site for the A-Five, S-Five, E-Five, S-125, S-250, Cordi, History Models and a few for the Roadstar. We dont have any plastics just the OEM engine parts to keep people on the road plus tires, lights, electrical and essentials. Just one more brand we decided to cover and when there is a new US importer ( could be one soon in 2011 from what we hear ) we will be here to help.

http://www.mrp-speed.com
Read more »

Whats better Adige? SN? Dr Pulley? we answer your emails

0 comments


Some Gokart enthusiasts wrote to ask which brand do we prefer for the karts, we'll sell all the brands, but in reality certain types of rollers vs sliders work better. We are having really good results on the 400cc and 300cc Adige Italian sliders, but we get better results with the SN- Scooter Ninja Taiwan on the small scooters and atvs like 17X12 and 20X12 the reason being is the angle of the cut. Adige is a round roller with slight cut where the SN is a deep cut and works great for small variators. Dr Pulley is a medium cut and Malossi / Polini are just round rollers. So it all depends what results you want. We sell them all, but currently depending on the application we suggest SN for small capacity and Adige for high maxi size engines. Depends on the application so email us your questions at the MRP website.

http://www.mrp-speed.com
Read more »

2010 Kymco Quannon 150 exhaust swap.wmv

0 comments


Check out the MRP Kymco Quanon 150 exhaust upgrade
Read more »

CF MOTO CDIS

Friday, July 16, 2010 0 comments

http://www.youtube.com/watch?v=4vfU22VjSMs

There are more and more companies promising to sell cheap GY6 and CDIs online. We previously reported on fake parts from China, we'll these are real Chinese parts, but what's starting to happen is that the industry requires brand specific models as more companies like CF MOTO, Linhai, Kymco manufacture in China they have parts that are not "Generic" nor cross compatible. They are brand specific much like Honda or Yamaha. So when we get emails from consumers saying " I made a mistake I purchased such and such CDI to save money " we have to say "Stop" before you buy check the OEM part and your dealer can order it from our repair manual section with real part numbers from the right factory.
Read more »

Daelim parts now at MRP

0 comments
Looking for Daelim parts? We got those now as well. Make sure to come to MRP - Were wholesale only so call your local dealer and have them call us.


http://www.youtube.com/watch?v=NlQwcYWSDcY&feature=channel

DAELIM PARTS NOW BEING ADDED TO THE MRP WEBSITE
Read more »

Top Five 300cc Upgrade Videos! CFMOTO

0 comments
Some more of our top videos including the top 5 racing videos!
1

2

3

4

5
Read more »

Repair Kits for Benelli M50 Scooters in Stock

0 comments


If you have an M50 Benelli or Mario Andretti Scooter purchased between 2008 - 2010 you might need to purchase a repair kit for it, we now have these in stock at MRP.

You can also contact:
Court Rutter
300 Walnut Street
Philadelphia, PA 19106
(T)267-546-9073
(F)267-546-9074
WWW.PowerSportsFactory.com
WWW.BikeShareSource.com

Please visit your local dealer and have them contact us to order a repair kit.

Consists of the following parts:
50060T430000
50003N140001
B01090501263
50100B470000
50800B470000
This is the complete 2010 Replacement Kit includes all parts to replace the fuel tank system.
Read more »

More Bad News from Baja Motorsports

0 comments
It just goes to show what a mess the Chinese have made of the US market, we have a lot of parts that work on these Baja Models. This was reported by DealerNews.com today and Guidos Blog http://blog.guidoebert.com/2010/07/16/baja-recalling-approx-308000-powersports-vehicles.aspx

In cooperation with the Consumer Product Safety Commission, Phoenix-based Baja Motorsports is recalling about 308,000 minibikes and go-karts. Consumers should stop using the units unless otherwise instructed, the government says.


According to the CPSC, the gas caps on these units can leak or detach from the fuel tanks, posing a fire hazard. In addition, the throttles can stick due to an improperly positioned fuel line and throttle cable, posing a sudden acceleration hazard.

Baja Motorsports has received at least nine reports of the gas caps leaking and detaching, including one report of a serious burn injury to a child. The firm has also received 25 reports of stuck throttles possibly due to the fuel line and throttle cable being improperly attached, with injuries to the face and other parts of the body reported.

The units, made in China, were sold by various retailers nationwide from November 2004 through June 2010 for between $200 and $2,000. They were also sold on the following websites: Costco.com, Amazon.com, Toysrus.com, Northerntool.com, Sears.com and Kmart.com.

The recall involves minibikes with model numbers beginning with HT65, MB165, WR65, MB196, DB30, WR90 and DR90. It involves go-karts with model numbers BB65, SD65, DN65 and RT65. The model number is located on the minibikes’ fenders and/or fuel tank and on the go-karts’ roll cage. They both have black plastic gas caps.

The government is instructing owners to contact Baja Mototosports (www.bajamotorsports.net) for a free replacement gas cap and to schedule a free repair of the fuel line and throttle cable. The company can be contacted at 888-863-2252 between 10 a.m. and 7 p.m. Eastern Time, Monday through Friday.
Read more »

Ball Bearings BY MRP - We got Balls!

Thursday, July 15, 2010 1 comments


Ball Bearings http://www.youtube.com/watch?v=U_-pywHfAyc

We have the widest selection of bearings on the market to see our full list click here: http://www.martinracingdealer.com/CategoryProductList.jsp?cat=Parts+by+Type:Bearings


MRP offers OEM And Aftermarket
• Genuine MRP quality
• Longer service life
• Unmatched local inventory
The series of numbers in front of the bearing name can provide much information about that specific type of bearing.

FOR MORE VIDEOS CLICK HERE
http://www.youtube.com/watch?v=BVDL8P_el1M&feature=player_embedded


Here is an example:6001ZZ 6 = Type Code 0 = Series 01 = Bore Size ZZ = Suffix Type Code Definitions: 1 - Self-aligning ball bearing 2 - Wide self-aligning ball bearing 3 - Double-row angular contact ball bearing 4 - Double-row ball bearing 5 - Thrust ball bearing 6 - Single-row deep groove ball bearing 7 - Single-row angular contact bearing 16 - Thin section single-row deep groove ball bearing 22 - Self-aligning roller bearing 23 - Wide self-aligning roller bearing Series: (Identifies the lightness or heaviness of the bearing) 0 - Extra Light 1 - Extra Light Thrust 2 - Light 3 - Medium 4 - Heavy 7 - Not Sure 8 - Extra Thin Section 9 - Very Thin Section Bore Sizes (in mm): For most bearings, the bore size can be calculated by adding the 3rd and 4th digits together and multiplying the result by 5. However, there are a few exceptions to this rule, as follows: 00 = 10 mm 01 = 12 mm 02 = 15 mm 03 = 17 mm Suffix Meanings: Z - Single Shielded ZZ - Double Shielded RS - Single Sealed 2RS - Double Sealed V - Single Non-contact Seal VV - Double Non-contact Seal DDU - Double Contact Seals NR - Snap Ring and Groove M - Brass Cage

TO LOOK UP THE OEM BALL BEARING PART NUMBERS GO TO THE MANUALS SECTION
http://www.martinracingdealer.com/WSWrapper.jsp?mypage=Manuals.htm


WE ARE WHOLESALE ONLY CALL ONE OF OUR LOCAL DEALERS FOUND HERE:
http://www.martinracingdealer.com/locator/index.php
DEALER LIST


http://www.youtube.com/watch?v=BVDL8P_el1M&feature=player_embedded

SCOOTER ATV GOKART BUGGY SIZES WE OFFER
6007LLU 107DD
6011 111
6012 112
6014 114
6015 115
6017NR 117L
1211#BCA 1211
1212SL#BCA 1212SL
1214#BCA 1214
6022NR 122L
1306SS/2A#BCA 1306SS
1310L#BCA 1310L
1311L#BCA 1311L
1314#BCA 1314
1315#BCA 1315
6200LLU 200CC
6201LLU 201CC
6202LLU 202FF
6202Z 202S
6203LU 203F
6203LLU 203FF
6204 204
6204LLU 204FF
6205LLU 205FF
6205ZZ 205SS
6205LLUA1C3/2E 205VV
6206LLU 206FF
6206ZZ 206SS
6206LLUAC3/2E 206VV
6207LLU 207FF
6207NR 207L
Precision Ball Bearings
NTN Part Number Industry Part Number
6208 208
6208ZZ 208SS
6209 209
6209LLU 209DD
6210 210
6211 211
6211NR 211L
6212 212
6212ZZ 212SS
6213 213
6303LLU 303CC
6303ZZ 303SS
6304LLU 304DD
6305LLU 305DD
6305ZZ 305SS
6306ZZ 306SS
6306LLUA1C3/2E 306VV
6307 307
6310 310
6310NR 310L
6312 312
6313 313
6314 314
6317ZZ 317SS
608LLU 38CC
5205SCLLD/2AS 5205KZZE
5207SC3 5207KE
5209SC3 5209KE
5211SC3 5211KE
5212SC3 5212KE
5309SNR 5309KLE

MRP distributes OEM parts for TNG (CMSI), select models of CF Moto, Daelim Motors Korea ( parts should appear on website by mid July) Malaguti of Italy (www.Malaguti.com) Keeway Southeast (Keeway, Vento, QJ, Andretti, Yamati models), CPI Taiwan, Powersports Factory Brands PSF, Diamo, Cubik (matches OEM Vento part numbers), as well as QJ and ZNEN (who manufacture bikes for a variety of scooter importers) such as FlyScooters, Lance, BMS, Qlink models that were ZNEN corresponding to matching TNG parts.

On our site you can find parts for ZNEN, FLYSCOOTERS, LANCE POWERSPORTS, DIAMO, QJ, VENTO ( Yes Vento is out of business) United Motors ( these guys left the market as well ) Tank, GY6, QMB139, we have parts for CFMOTO, Linhai, GY6 QMI152/157 QMJ152/157 4-stroke engines, 250cc 4-stroke CN250 water-cooled 172mm engines, 50cc 4-stroke QMB139 engines. This engine is used on virtually all 49cc/50cc 4-stroke Chinese and Taiwanese scooters, 2-stroke 1PE40QMB Minarelli based engine, EUROPEAN LIQUID COOLED JOG Benelli, Malaguti, Italjet Minarelli LC - Like Aprilia, we also have Parts for scooters with 50cc 2-stroke D1E41QMB02, D1E41QMB, H1E41QMB and 1E41QMB model engines. This motor is used on many popular Chinese scooters including the Qingqi QMQT50-B2, Genuine Scooter parts for Genuine dealers you name it we have.
Read more »

This oil spill has gone on long enough!

Wednesday, July 14, 2010 0 comments
This oil spill has gone on long enough!

This was on the Scooter Scoop today. Steve is right on the money we need to spread the word and tell everyone to kick BP to the curve, its the worst run company in the history of mankind since Germany in WW2. The people in charge of BP are idiots, they should be brought up on criminal charges.

Ban BP from doing business in the US. BAN BP.
Read more »

Addressing the Powersports Problems of 2010

0 comments


Addressing the industry problems of 2010



- I have gotten a flood of emails the last few days from dealers with issues with distributors, co-ops not being paid, distributors not paying for returned bikes, warranty lawsuits, lemon laws being broken, I can’t comment on half these problems, but what I will say is we will help you the dealership any way we can.



The best analogy I can give is when the building is on fire some people run and there are others that run inside to put out the flames. My video comment on this situation: http://www.youtube.com/watch?v=WuvpntSagEE







I want our dealers to know that even if we're not United Motors, Tank, Roketa or any of the companies responsible for the issues they are having we are still here to help to the best of our abilities. I field at least two to three calls a week from dealers or consumers wanting a warranty paid on a United Motors scooters. We have nothing to do with this unfortunately in states with strict lemon laws the dealers if not able to find parts or repair the unit like in Arizona are forced to give the consumer a new vehicle or their money back. 2009 saw so many distributors and dealers close that this problem has become a daily occurrence in our field of work for on-road vehicles. We strive to help the dealers out and get those riders back on the road and to help you The Dealer avoid any issues of this nature that might arise because a distributor left the marketplace.



I have watched this year as some companies have done everything possible to avoid any responsibility and not only sunk some of their dealers, but helped make the situation worse by selling retail or opening online stores for parts. Some discounted bikes after selling them at full cost to dealers. I'm human like everyone else so you see two types of players out there the guys running away and the guys running into the fire to help dealers, to expand, to grow and to make the most of the situation. So at the end of the day you can say why would you want to count a pile of United Motors parts? and if for no other reason you do it because that's what the market needs.



I have also commented and complimented industry leaders who have in a way thought me the proper way to do things. CF-MOTO USA has done an amazing job of looking for alternative ways to help their dealer network. I think people are overly critical without knowing the challenges a new upstart faces especially in a market where store credit lines and GE lines are continuously being cut. So this company has done the impossible and actually expanded the line in a downmarket. The fact that they keep sending out trucks, doing events, helping dealers with open houses makes it a brand that is still pushing. That's what dealers need in this market when others are retreating Lev, Kevin, Ivan, and everyone at CF MOTO USA keep pushing and dealers need to be aware of that.



I actually have to complement Erica Price for the suggestion last month of helping buy back older clothing from stocking dealers to help them stay profitable. We started this for stocking Armadillo dealers and I have to say they have been happy and many of them retail both Armadillo and Corazzo at the same time – one line working hand in hand with the other. Part of the reason is because of ideas like hers. Everyone at Kymco USA who not only worked overtime to help dealers out, but have dedicated their own personal time to travel (Look at the Scoot to Texas Promotion at Amerivespa,) this company has helped increase sales when sales are down. Literally everyone at that company Joe, Bruce, Rick even the CEO has made an effort to help their dealers survive the downturn and I can’t express how impressive that has been. I know Honda and Yamaha are the companies you should aspire to be, but Kymco gets an “A+” for effort in 2009 and 2010.

Life isn’t a smooth ride, it’s meant to be a rollercoaster and I have seen this all before. I have literally watched half a dealer network get wiped out after the tragedy of September 11, 2001. I have also seen the market surge with an influx of fly-by-night profit seekers during the boom of 2007. So this business goes in cycles. I might not have been around the moped explosion back in the 70s, but I will say history tens to repeat itself so we are due for an increase in sales thanks to oil. – Look at the Lloyds of London report from yesterday on the fact that gas prices and insurance companies are hedging themselves for the next oil surge. So hang in there sales are coming.



Regarding recent tragic events in the business we will do everything possible to find the cross compatibility for SYM and Carter parts. I have no doubt the company will come back stronger than ever in 2011. SYM is the second largest maker of scooters in Taiwan and they have a vested interest in the US market. They are ten times the size of other known Taiwanese brands in the US so they have the funds and the ability to come back. Carter makes an excellent gokart and our aftermarket parts are here to help.



We just acquired the Daelim Motors parts and will be working the entire month of July to add these to our sites and to help the dealers out there that are in need of support for the brand. I have no doubt that the US economy will come back, that gas prices are bound to go back up in 2011 and the dealers that remain will make a huge profit. Our way of life is unsustainable and Americans need to embrace motorcycling and alternative vehicles as part of the solution. MRP would like to be part of this general solution with parts from gas to emerging electric scooter brands.



We are working hard every single day of the week to add Diamo, Italjet, QJ, Keeway, Andretti, Benelli, Cubik, UM, parts to our website. We add to 20 to 40 parts per day, since January 2010 we have added over 6,000

new items to our website. Nobody in the USA has the number of SKUs MRP now has. So support your local dealer since our company is DEALER ONLY. We will drop ship for them so SUPPORT YOUR LOCAL DEALER.



We are the ONLY wholesale ONLY distributor in the USA and our goal is for you to get back on the road. So please follow the link to the repair manuals with part numbers, if you can’t find the part send us a picture, we will help you as best we can.

BOOKMARK THIS LINK THIS WILL HELP YOU FIND THE PARTS - GET THE OEM NUMBERS WHEN CALLING OR EMAILING US IF POSSIBLE

http://www.martinracingdealer.com/WSWrapper.jsp?mypage=Manuals.htm

CAN'T FIND IT? SEND US A PICTURE AND A DESCRIPTION WE WILL EMAIL / CALL YOU BACK





Stocking Dealer locator - FIND THE DEALER NEAR YOU - NOBODY NEAR YOU? CLICK ON ONLINE DEALERS. - CALL THEM

http://www.martinracingdealer.com/locator/index.php

MRP distributes OEM parts for TNG (CMSI), select models of CF Moto, Daelim Motors Korea ( parts should appear on website by mid July) Malaguti of Italy (www.Malaguti.com) Keeway Southeast (Keeway, Vento, QJ, Andretti, Yamati models), CPI Taiwan, Powersports Factory Brands PSF, Diamo, Cubik (matches OEM Vento part numbers), as well as QJ and ZNEN (who manufacture bikes for a variety of scooter importers) such as FlyScooters, Lance, BMS, Qlink models that were ZNEN corresponding to matching TNG parts.

On our site you can find parts for ZNEN, FLYSCOOTERS, LANCE POWERSPORTS, DIAMO, QJ, VENTO ( Yes Vento is out of business) United Motors ( these guys left the market as well ) Tank, GY6, QMB139, we have parts for CFMOTO, Linhai, GY6 QMI152/157 QMJ152/157 4-stroke engines, 250cc 4-stroke CN250 water-cooled 172mm engines, 50cc 4-stroke QMB139 engines. This engine is used on virtually all 49cc/50cc 4-stroke Chinese and Taiwanese scooters, 2-stroke 1PE40QMB Minarelli based engine, EUROPEAN LIQUID COOLED JOG Benelli, Malaguti, Italjet Minarelli LC - Like Aprilia, we also have Parts for scooters with 50cc 2-stroke D1E41QMB02, D1E41QMB, H1E41QMB and 1E41QMB model engines. This motor is used on many popular Chinese scooters including the Qingqi QMQT50-B2, Genuine Scooter parts for Genuine dealers you name it we have.









Read more »

MRP sells Variators for all makes and models

Tuesday, July 13, 2010 0 comments
Read more »

Will your town have a scooter shop when the oil boom happens?

0 comments

All the negative news lately is a little crazy, I'm starting to wonder what will happen when your local community doesn't have a scooter store?

Ebay and Amazon won't be delivering bikes to your house when the delivery of a crated scooter will cost as much as the bike itself. Something to think about. Obama just banned drilling off the coast again, BP has managed to destroy the coast of Florida for years to come and the outrage isnt all there yet because the mansions in West Palm haven't been affected, but wait for the first German tourist to come out covered in ooze. I've had to sit here and watch several scooter stores suffer because nobody is renting scooters in Panama city, plus the dealers in New Orleans are just dying thanks to BP. The funny thing its all a circle and oil is cheap today, heck BP is giving it away off the coast, but in two to three years there could be fights at the gas pump again check these links out and ask yourself WILL THERE BE A SCOOTER SHOP IN YOUR TOWN?


Venerable financial institutions Lloyds of London and Chatham House issued a dire warning to UK businesses. Energy shortages and peak oil are going to be major issues for insurance markets in coming years.

The groups issued a joint report, Sustainable Energy Security: Strategic Risks and Opportunities for Business, which explained, "Companies which are able to take advantage of this new energy reality will increase both their resilience and competitiveness. Failure to do so could lead to expensive and potentially catastrophic consequences."


Reprinted from the Guardian in the UK

http://www.guardian.co.uk/business/2010/jul/11/peak-oil-energy-disruption

One of the City's most respected institutions has warned of "catastrophic consequences" for businesses that fail to prepare for a world of increasing oil scarcity and a lower carbon economy.

The Lloyd's insurance market and the highly regarded Royal Institute of International Affairs, known as Chatham House, says Britain needs to be ready for "peak oil" and disrupted energy supplies at a time of soaring fuel demand in China and India, constraints on production caused by the BP oil spill and political moves to cut CO2 to halt global warming.

"Companies which are able to take advantage of this new energy reality will increase both their resilience and competitiveness. Failure to do so could lead to expensive and potentially catastrophic consequences," says the Lloyd's and Chatham House report "Sustainable energy security: strategic risks and opportunities for business".

The insurance market has a major interest in preparedness to counter climate change because of the fear of rising insurance claims related to property damage and business disruption. The review is groundbreaking because it comes from the heart of the City and contains the kind of dire warnings that are more associated with environmental groups or others accused by critics of resorting to hype. It takes a pot shot at the International Energy Agency which has been under fire for apparently under-estimating the threats, noting: "IEA expectations [on crude output] over the last decade have generally gone unmet."

The report the world is heading for a global oil supply crunch and high prices owing to insufficient investment in oil production plus a rebound in global demand following recession. It repeats warning from Professor Paul Stevens, a former economist from Dundee University, at an earlier Chatham House conference that lack of oil by 2013 could force the price of crude above $200 (£130) a barrel.

It also quotes from a US department of energy report highlighting the economic chaos that would result from declining oil production as global demand continued to rise, recommending a crash programme to overhaul the transport system. "Even before we reach peak oil," says the Lloyd's report, "we could witness an oil supply crunch because of increased Asian demand. Major new investment in energy takes 10-15 years from the initial investment to first production, and to date we have not seen the amount of new projects that would supply the projected increase in demand."

And while the world is gradually moving to new kinds of clean energy technologies the insurance market warns that there could be shortages of earth metals and other raw materials needed to help them thrive.

Lloyd's also calls on manufacturers, retailers and the wider business community to reassess global supply chains and their just-in time models because the "current system is increasingly vulnerable to disruption."

The report says government needs to do much more to bring additional price stability and transparency if the global carbon market is to become a reality.

Richard Ward, chief executive of Lloyd's, said the failure of the Copenhagen climate change talks last December has helped lull many business leaders into a false sense of security about the challenges ahead. "We are in a period akin to a phony war. We keep hearing of difficulties to come, but with oil, gas and coal still broadly accessible – and largely capable of being distributed where they are needed – the bad times have not yet hit ... all businesses ... will be affected by energy supplies which are less reliable and more expensive."

• This article was amended on 12 July 2010. The original referred to Chatham House as being the Institute of Strategic Studies. It is the Royal Institute of International Affairs.

Read more »
Related Posts Plugin for WordPress, Blogger...

Blog Archive

My Ping in TotalPing.com